Laptop Screen
Laptop Screen Replacement
TechBrotherz, a walk-in repair store at 3317 17 Ave SE in Calgary, Alberta, replaces laptop screens. Unlike a phone, a laptop panel is not bonded to a touch layer, which makes the replacement itself a clean job.
Laptop screen replacement at TechBrotherz in Calgary is quoted once the panel your machine takes has been identified, because size, resolution and touch capability all change the part. Most laptop screens are replaced the same day, and every repair carries a 60-day warranty on the part and the workmanship.
Key facts
- Quote: Free at the Store, part and labour included
- Typical time: About 60 minutes
- Included: The part, the labour and the testing
- Warranty: 60 days on the part and the work
- Appointment: Not needed, walk in during opening hours
Last updated
Compared
What Changes the Price of a Laptop Screen Replacement
| Panel type | Why it costs what it does | Typical machine |
|---|---|---|
| Standard HD, non-touch | The most widely produced panel type, and the cheapest kind to replace | Mainstream 15-inch home and office laptops |
| Full HD or higher, non-touch | A more expensive panel to buy, with identical labour to fit | Business laptops and mid-range ultrabooks |
| Touch-enabled | The digitiser is bonded to the panel, so both replace as one assembly | Convertibles and two-in-one laptops |
| High refresh or wide gamut | A specialist panel with a higher part cost, unchanged labour | Gaming and creator laptops |
Symptoms
Which Symptoms Point at This Repair?
If your device is doing one of these, this is usually the repair it needs.
- Cracked glass or a visible impact mark, usually with spreading dark ink-like patches.
- The screen stays black while the machine clearly boots, with fans running and lights on.
- Flickering, or a picture that comes and goes when the lid is moved.
- Coloured vertical lines, or a band of distortion down one side.
- A dim picture only visible at an angle in bright light, which usually means the backlight.
The Repair
What Does This Repair Actually Involve?
Written out so you know what you are paying for, not to make it sound complicated.
- Step 1
The Panel Is Identified From the Machine
Laptop panels vary by size, resolution, connector and whether they are touch. The model number on the underside identifies the exact part, which is what makes a firm price possible.
- Step 2
An External Monitor Rules Out the Graphics
If a second screen shows a perfect picture, the panel is the fault. If the external display is also wrong, the problem is the graphics hardware and a new panel would fix nothing.
- Step 3
The Bezel Is Removed and the Panel Unclipped
The plastic surround comes off, the panel is unscrewed from its brackets and tilted forward, and the video cable is released from the back.
- Step 4
The New Panel Is Fitted and Tested Before Closing
The panel is connected and the machine booted while it is still open, because finding a bad connection now is far easier than after the bezel is back on.
- Step 5
The Lid Is Reassembled and Checked
The bezel clips back on, and the hinge is checked through its full range so the picture does not flicker when the lid moves.
Is It the Screen or the Graphics?
This is the check worth doing before paying for a panel, and it costs nothing. Plug the laptop into an external monitor or a television with an HDMI cable and see what appears. If the external display shows a perfect picture, the machine, the graphics and the operating system are all fine and the panel is the fault.
If the external display shows the same distortion, lines or blackness, the problem is not the panel at all. It is the graphics hardware or the connection to it, and replacing the screen would change nothing. That is an expensive mistake to make, and it is avoidable in two minutes.
There is a third case worth knowing. If the picture flickers or cuts out when the lid is moved through its range, the video cable running through the hinge is the likely fault rather than the panel itself, and that is a different and usually cheaper part.
What Decides the Price of a Laptop Screen?
What a specific machine's screen costs to replace depends entirely on the panel it takes. Four things drive that: the physical size, the resolution, whether the panel is touch-enabled, and in some cases the refresh rate and colour specification on machines built for gaming or design work.
A standard HD panel in a mainstream 15-inch laptop is the common case and sits at the bottom of the range. A high-resolution panel, a touch panel, or a high-refresh gaming panel costs substantially more, because those are more expensive parts to buy rather than more expensive work to fit.
The labour is broadly the same across all of them, which is why the model number matters so much for a firm quote. Bring the laptop or the number from the sticker underneath and the price stops being an estimate.
Why Is a Laptop Screen Easier to Replace Than a Phone Screen?
A laptop panel is a single component that is not bonded to anything else. It sits in the lid held by brackets and screws, connected by one video cable, with a plastic bezel clipped over the front. The bezel comes off, the panel unscrews, the cable unplugs, and a new one goes in the same way.
There is no adhesive to heat and cut, no digitiser laminated to the front, and no sensor assembly that has to be transferred across. On a non-touch laptop, which is most of them, there is no touch layer involved at all.
That is why the price is dominated by the part rather than the labour, which is the reverse of a repair like Iphone back glass. The work is straightforward. What varies is what the panel costs.
Is It Worth Replacing a Screen on an Older Laptop?
Usually yes, when the rest of the machine is sound. A broken panel on a laptop whose processor, memory and storage all still work is a single failed component, and replacing it returns a fully working computer for a fraction of what a replacement machine costs.
One thing changes that calculation now. Microsoft ended support for Windows 10 on 14 October 2025, and a machine that cannot meet the Windows 11 hardware requirements keeps working but stops receiving security updates. That is worth knowing before spending on a screen, and we check it when the machine comes in.
The other case for pausing is a machine with more than one thing wrong. A cracked screen alongside a failing drive and a dead battery is three repairs, and at that point the total is worth weighing honestly against a replacement rather than paid for one piece at a time.
By Model
Where This Repair Differs by Model
Touch-enabled laptops
The digitiser is bonded to the panel on most touch laptops, so the assembly replaces as one part and costs considerably more than a plain panel.
Gaming and creator laptops
High refresh rate and wide colour gamut panels are more expensive parts. The labour is unchanged, but the quote will be higher.
Ultrabooks with bonded glass lids
A few thin-and-light designs bond the panel to a glass lid, which makes the repair closer to a tablet screen than a standard laptop panel.
Honest Limits
When This Repair Is Not Worth It
- When an external monitor shows the same fault, since the graphics hardware is the problem rather than the panel.
- When the machine also needs a drive and a battery, because the total starts approaching a replacement.
- When the picture only fails as the lid moves, which points at the hinge cable rather than the screen.
Every price on this page includes the part and the labour, and every repair carries a 60-day warranty on the part and the workmanship. Prices for every device TechBrotherz repairs are on how quoting works.
Questions
Questions About Laptop Screen Replacement
Laptop screen replacement at TechBrotherz in Calgary is quoted once the panel has been identified, free of charge, before any work starts. Size, resolution and whether the panel is touch-enabled all change the part, while the labour stays broadly the same whichever panel the machine takes.
Plug the laptop into an external monitor or television. If the external display shows a perfect picture, the panel is at fault and replacing it will fix the machine. If the external display shows the same problem, the graphics hardware is the cause and a new screen would change nothing.
Probably not. A picture that cuts out or flickers as the lid moves through its range usually means the video cable running through the hinge has worn, not that the panel has failed. That is a different and generally cheaper part, and TechBrotherz checks the hinge range as part of the diagnosis.
Usually, when the rest of the machine is sound, because a broken panel is one failed component on an otherwise working computer. Since Microsoft ended Windows 10 support on 14 October 2025, TechBrotherz also checks whether the machine meets the Windows 11 requirements, because that affects whether it is worth spending on.
Related pages
Walk in and we will price it at the Store
TechBrotherz is at 3317 17 Ave SE in Calgary. No appointment needed, and nothing starts until you have agreed the price.